Need to give your kitchen a new look without depleting your wallet? Consider painting the kitchen cabinet. Wood Cabinets with wood finish entail taking out the current chalk paint or latex paint or milk paint and applying new paint to the exposed wood. This restorative task revives cabinets that have depleted over time by either being scratched, blurred or stained, and inhales new life into an old kitchen.
Painting cabinets can appear to be an overwhelming task, however, it’s much simpler when you don’t need to stress over sanding the oak cabinet with a cabinet door. To prevent sanding, the use of a deglosser to paint your cabinets prior is important. A deglosser helps remove all the varnish from your cabinets and ensures the paint sticks. For anyone considering refurbishing their kitchen effectively and quickly, painting your cabinets with a new laminate coat gives them a new look and is cheaper than renovating the whole kitchen. Laminate cabinets for an even better look than the woodwork.
Materials needed for painting include; liquid deglosser, liquid sandpaper to remove cabinet paint, oil-based primer, satin enamel, washcloth, painters’ tape, screwdriver, paint roller, scrubbing sponge, grease-cutting cleaner, paint brush or paint sprayer, and thumbtacks. Choose your paint color wisely. You can also opt to choose general finishes milk paint for smooth finish. Go with the same color for upper cabinets and lower cabinets. While you paint, remember to follow the wood grain for better results.
Painting Kitchen Cabinets: Advice & Tips
1. Remove Cabinet Doors and Drawer Fronts
Get out the drawers from the cabinets and stack them in an accessible area. Lift them slightly up to get them out from the tracks within the cabinet unit. Be cautious to not pull too hard the whole track away from the unit. In case the drawers are attached to the frame, it might be hard to remove them, thus, leave to paint when painting the frame.
Using a painter’s tape, label the cabinet doors than with a drill or screwdriver remove the hinges and the hardware from the cabinet doors. Take out all the things from the cabinet shelves and pull them out. Put the items in boxes marked with their area they had been placed.
2. Cleaning the Cabinets
Clean any grime or dirt on the surface of the cabinets using a scrubbing sponge and a degreaser. Wipe down thoroughly all the segments of the cabinet drawer with a wet material and let them dry. Using a washcloth soaked in water with no cleansers wipe off all the shelves, drawers, doors and frames. Make sure you clean all the areas including the hard to reach spots like the corners and the undersides to rinse off most of the degreaser.
It’s critical to likewise note to wear wellbeing goggles and gloves while working with deglosser. What’s more, open your windows for ventilation regardless of whether the jug doesn’t instruct you to. These are synthetic chemicals, so take the necessary precautions to prevent yourself from any reaction to your body. Nobody needs that in our eyes or irritation on our skin. The procedure is entirely basic, however: squirt a decent measure of fluid on a course fabric to apply.
Pour your liquid deglosser to a washcloth to wipe the cabinets doors both the front and the back. Cabinet frames are generally clean and have less varnish, so on need to apply deglosser on them. Never apply the deglosser inside as it’s harmful and powerful if the fumes are breathed in.
Leave the deglosser for 30 minutes to dry as you don’t have to wipe it off the cabinet doors. Don’t touch the deglosser with your hands to check if it has dried as it tends to be extra strong. You can set a timer to help you monitor and ensure it has dried to apply primer. If you want to paint cabinets, you should go through these steps. You need to carefully work on the cabinet surface with sandpaper or sanding sponge to remove color or stain.
3. Painting the Frames and Doors
One hour after the deglosser has dried up, apply primer on the drawers and door front using a paintbrush with medium bristles. Wait for 30 minutes for the primer to dry and turn the doors to the backside and apply also. Use thumbtacks to hold the doors high to prevent the applied surface from sanding. Within 2 hours the primer will have dried on both surfaces. Within 2 hours the oil paint primer will have dried on both surfaces. Use careful brush strokes or spray paint or oil based paint.
Add a layer of cabinet enamel to the back surface of the drawers and doors. Utilize a roller for painting since the back surfaces of the cupboards will, in general, be level with narrow edges. At that point, gently go over the paint layer with a fine brush to avoid bubbles. Give the paint a chance to dry for in any event 4 hours before flipping them over to paint the fronts.
A few cabinets have embellishment or plans on the front surface which can be difficult to paint with a roller. Utilize the fibers of the brush to paint the narrow edges in the drawers and coat better details with a layer of paint. Apply paint onto the fronts of the drawers, doors, and shelves. When the embellishment is painted, apply an even coat everywhere throughout the level surfaces, including the fronts and backs of the racks. At that point, return over the paint with a fine fiber brush to get rid of air bubbles and thicker regions of paint.
While the drawers and doors dry, paint the shelves and the frames with a roller, paint the frames with the primary layer of cabinet enamel. As you complete each segment, return overcoat with a fine fiber brush to clear any air bubbles and spread out thicker zones. Using the brush, ensure that any narrow corners and edges are painted.
It’s ideal to work in segments while painting the frames since it will, in general, be a bigger area. You can roll a segment and afterward go over the zone with the brush. At that point, move onto the following area and move on the paint before using the brush to make even the surface.
In case you’re painting dark cabinets a lighter shading, it’s a smart thought to use in any event 2 layers of paint to keep the darker shading from appearing through the light paint. Include a second layer of paint to the cupboards once they dry. For a more brilliant shading and more inclusion, trust that the paint will dry, and afterward apply a subsequent coat to many of the doors and the edges. Make sure to utilize a similar roller and brush system to guarantee an even coat. You can also choose to laminate kitchen cabinets.
4. Reattaching the Drawers and The Doors
After 24 hours the paint has dried up and now you can reattach the hardware. Allow the paint dry before you set the hardware back on the drawers and cabinet doors. If you put the hardware on too soon, it can scratch the paint.
When reattaching, use a power drill or a screwdriver to stay away from possibly tightening the hinges and the hardware to an extreme, causing a gouge or chip in the paint. Rehang the cabinet doors and put back the drawers to complete the room. Accumulate the hinges and position the drawers and doors where they should be hung. Screw the pivots back onto the frames and doors and test them to ensure they open and close easily.
Refurbishing your kitchen cabinets is important from time to time to make them look new and shiny. Renovating your kitchen is one way but you can also opt to paint your cabinets which is cheaper and fun to do. Always ensure you have the right materials before you start painting.
When cleaning makes sure you remove all the dirt ad grimes before applying any deglosser. If you don’t want to sand your cabinets always use a deglosser before you apply the primer and the paint. Apply two layers of the paint to look great and avoid air bubbles when painting. Give the paint a chance to dry for in any event before flipping them over to paint the fronts. But when you think about the painted cabinet as a finished result, you know all the hard work is well paid off.